Boulder, CO 80301 Carpet Cleaner, Cleancare of Boulder


How Wet Do Your Carpets Get After Cleaning?  from Cleanfax

To see other articles like this, click here:

The relationship between carpet and moisture is a tenuous one at best. Most carpets do not react well to trapped moisture, so cleaning them becomes a complicated balancing act between adding moisture to the fibers of the carpet to clean them without damaging the fibers or padding underneath.

There are multiple ways to clean carpet from steam to dry-chemical cleaning; all carpet-cleaning methods have their advantages and drawbacks, but it is important to remember that none of them is a completely dry process.

“The word ‘dry’ is really a misnomer because no process is completely dry; there are solvents and other chemicals that have some moisture in all of these processes,” says Phil Auserehl, president of Castle Cleaning & Rug Company in Berthoud, Colo.  Boulder, CO 80301 carpet cleaner.

Problems with moisture

One of the biggest problems that excessive moisture can cause is damage to the structural integrity of the carpet itself.

“Moisture extraction is important because moisture that is left in the carpet can make the carpet delaminate, which means the backing comes apart,” says Barbra Wilson, manager of technical information for the Carpet and Rug Institute.

Tools of the trade

Opinions vary about the acceptable amount of time to leave a carpet wet — about 12 to 24 hours is a standard range. A good rule of thumb is to dry it as soon as possible. In most cases, additional equipment is needed to accelerate the drying process, as well as to determine whether the carpet is fully dry. Extractors, dehumidifiers and fans are the tools of choice when it comes to giving Mother Nature a helping hand. Extractors can be used to boost the drying process, and these are often the initial step toward a dry carpet.

“We tend to use our extractors multiple times in order to get as much moisture out of the fibers before we employ fans or dehumidifiers. The more you get out in the first place, the less you need to use secondary equipment,” says Dave Thompson, vice president of T&M Cleaning in Laramie, Wyo.

The next step is dehumidifiers and fans.

“We use turbo fans that move vastly more air than your normal household fans,” says Auserehl. “The motors in these fans also heat the air somewhat to accelerate the process.”

Cleancare of Boulder,  uses a new technology called the Airpath. Boulder, CO 80301 carpet cleaner. It’s a  downdraft blower fan which pulls warm, dry air from above and directs it across all 360°  of the entire surface of the floor at once – up to 12 feet in all directions.  When moved around the room intermittently, the carpet dries quickly.

Area AlertYou also need to keep in mind the geographical environment when it comes to drying times.

“If you are in a dry climate, then your carpet will dry in a reasonable amount of time, but if it is a rainy day or you are in a more humid climate, then it is harder to get the carpet dry, so fans and other drying equipment should be used,” says Auserehl.

Humidity in the air is often overlooked and can greatly affect drying time.

“In humid areas, you need to use air movers, fans or dehumidifiers to help ensure the carpet is dry within a 12-hour period,” says Wilson.

The reason these air movers or fans are so important is because stagnant air can be a deterrent to the drying process.

“Moisture in the carpet can create a ground fog or swamp effect that needs to be disturbed by fans, or that can greatly retard the drying process,” says Auserehl.